Emergency Service: 631-655-8120

Emergency Service: 631-655-8120

Energy Kinetics · System 2000 Frontier · EK1F and EK2F

Energy Kinetics System 2000 Oil Boiler & Hot Water

A low-mass oil boiler with its own hot water storage, made for large homes with baseboard or radiant heat. Specs, sizing and installation in The Hamptons and across Suffolk County.

  • Licensed & insured
  • Baseboard & radiant heat
  • Quogue & Eastport, NY
Energy Kinetics System 2000 oil boiler with its Energy Manager control and hot water storage tank

88.6%top AFUE rating

B100Bioheat listed

5 zonesstandard, up to 15

  • Up to 88.6%AFUE at the
    best setting
  • 82k to 207kBTU/h heating
    capacity
  • 155 to 375gallons of hot water
    in the first hour
  • 5 to 15zones with the
    Energy Manager
  • B100Bioheat listed
    with B100 burner
  • Lifetimelimited warranty
    on pressure vessel

Ratings change with the oil firing rate. The highest ratings need a sidewall vent; with a chimney the best is 87.5% (EK1F) or 87.6% (EK2F).

Is it right for your home?

Built for large homes that stay on oil

System 2000 is a combined heating and hot water system. Its low-mass boiler heats up in about 90 seconds, and its Energy Manager sends leftover heat to a zone or the hot water tank after each cycle instead of losing it up the chimney.

A great fit when:

  • You heat with oil and want a more efficient replacement for an old cast iron oil boiler.
  • The house has baseboard or radiant heat with several zones. The Energy Manager runs 5 zones as standard and up to 15.
  • Hot water demand is high, with guests, soaking tubs or several baths. Storage tanks come in 40, 80 and 120 gallons.
  • You want to burn Bioheat. It is UL listed for blends up to B100 with a B100-listed burner.

Consider another option when:

  • You want to stop burning oil. A cold-climate heat pump such as the Bosch IDS Ultra may qualify for PSEG Long Island rebates.
  • You have natural gas or propane. A condensing gas boiler such as the Navien NHB-150H reaches 95% AFUE.
  • You would rather not keep an oil tank. Gas, propane and electric options free up the space and end oil deliveries.

We size every boiler with a heat loss calculation, not by matching the old one.

Oil or Bioheat tankBlends up to B100 with the right burner
System 2000 boilerLow mass, hot in about 90 seconds
Energy ManagerRuns the zones and recovers leftover heat
Heating zonesBaseboard or radiant heat
Hot water tank40, 80 or 120 gallons
System 2000 layout: one boiler, the Energy Manager control, your heating zones and a hot water storage tank.

How it works

Fast heat. Leftover heat goes back to work.

  1. 1

    The boiler starts cold and heats fast

    Its low-mass design reaches 140°F in about 90 seconds, so it does not keep a large mass of water hot all day.

  2. 2

    The Energy Manager runs each zone

    It controls 4 heating zones and the hot water tank as standard.

  3. 3

    Leftover heat is recovered

    When a call for heat ends, the burner stops but the pump keeps running, sending the remaining heat to the last zone or the hot water tank.

Full specifications

System 2000 specs by model

Figures from Energy Kinetics' September 2026 brochure and EK1/EK2 oil installation manual. Ratings change with the oil firing rate we set for your home.

Energy Kinetics System 2000 Frontier, residential oil models
EK1FEK2F
Capacity
Oil firing rate0.68 to 1.00 GPH1.20 to 1.75 GPH
Heating capacity (DOE)82,000 to 118,000 BTU/h149,000 to 207,000 BTU/h
Factory setting0.85 GPH · 102,000 BTU/h1.40 GPH · 170,000 BTU/h
Efficiency
AFUE (by firing rate)86.6% to 88.6%86.4% to 88.4%
AFUE at factory setting87.5%87.6%
Best AFUE with a chimney87.5%87.6%
ListingsENERGY STAR certified (EK1F from 0.85 GPH)
Hot water
Hot water in the first hour (40-gal tank)155 to 205 gal270 to 375 gal
Storage tank options40, 80 or 120 gallons, glass-lined
Installation
FuelOil, or Bioheat up to B100 with a B100-listed burner
VentingChimney or sidewall power vent, depending on firing rate; the most efficient settings vent through a side wall
Flue outlet4"6"
Zones5 standard (4 heating, 1 hot water), up to 15
Electrical120 V, 60 Hz, 7.5 A on a 15 A circuit
Width and height24" wide · 48" tall on low base, 56" on standard base
Depth without burner41"49"
Burner8" to 13" of extra depth, by burner
Weight with stand and piping350 lb475 lb

Installed price

What goes into your installed price

Two homes with the same equipment can have very different projects. We visit, check your chimney, zones and hot water use, and run a heat loss calculation, then give you one written quote that covers everything.

  • Oil tank & fuel lines

    Tank condition, filters and fuel lines rated for the Bioheat blend you burn.

  • Chimney or sidewall venting

    Chimney liner size, or a sidewall power vent depending on the firing rate.

  • Zones & piping

    Number of heating zones and how the boiler ties into your baseboard or radiant piping.

  • Hot water tank size

    40, 80 or 120 gallons, based on baths, guests and soaking tubs.

  • Removal of the old boiler

    Disconnecting, draining and hauling away the old system.

  • Permits & inspection

    Town permits and fuel safety checks.

Rebates and Bioheat in 2026

There are no PSEG Long Island or federal rebates for oil boilers in 2026; the federal 25C credit ended for equipment installed after December 31, 2025. New York requires Bioheat in heating oil, B10 today and B20 from July 2030, and System 2000 is UL listed for blends up to B100.

If you are open to switching fuels, cold-climate heat pumps may qualify for PSEG Long Island rebates. We can quote both options so you can compare.
Compare my options
Hamptons Air technician holding a tablet next to the company service van outside a home
Licensed & insuredInstalling across The Hamptons

Why install it with Hamptons Air

Energy Kinetics' warranty, plus ours

Energy Kinetics gives the boiler's pressure vessel a lifetime limited warranty, and every new installation includes our Gold Membership.

LifetimePressure vesselLimited warranty, prorated after year 10 and transferable to a new owner. Parts 3 years.
2 yearsLabor warrantyIncluded with our Gold Membership on every new installation.
24/7Emergency serviceNights, weekends and holidays. Your first yearly maintenance visit is free.
  • Sized with a heat loss calculation

    We size the equipment to your home, not to the old unit, which is often oversized.

  • Bioheat ready

    We match the burner and filtration to the blend your oil company delivers.

  • Local and fast

    Locations in Quogue and Eastport, serving homes from Westhampton to Montauk and across Suffolk County.

Questions homeowners ask

System 2000 FAQ

Which System 2000 model do I need, EK1F or EK2F?

It depends on your heat loss and hot water use. The EK1F covers 82,000 to 118,000 BTU/h of heating and the EK2F 149,000 to 207,000 BTU/h; Energy Kinetics designs the EK2F for large homes. We size it with a heat loss calculation.

How efficient is it?

AFUE ratings run from 86.4% to 88.6% depending on the firing rate. The top settings need a sidewall vent; with a chimney the best is 87.5% to 87.6%. ENERGY STAR lists the EK1F from 0.85 GPH and the EK2F. Energy Kinetics says its heat recovery saves more than the rating shows; actual savings depend on your home.

Can it burn Bioheat?

Yes. It is UL listed for oil blends up to B100 biodiesel with a B100-listed burner. New York requires B10 in heating oil today and B20 from July 2030.

How much hot water does it make?

With a 40-gallon tank, Energy Kinetics rates it from 155 gallons in the first hour on the smallest EK1F setting to 375 gallons on the largest EK2F setting; figures above 195 gallons assume a continuous draw. Tanks also come in 80 and 120 gallons.

Can it vent through my chimney?

Usually, through a lined masonry or stainless chimney. Some firing rates are approved only for a sidewall power vent, so we choose the firing rate and the venting together.

Are there rebates for oil boilers?

Not from PSEG Long Island or the federal government in 2026; the federal 25C credit ended for equipment installed after December 31, 2025. Heat pumps may qualify for PSEG Long Island rebates if you are open to switching.

What warranty does it come with?

Energy Kinetics gives the pressure vessel a lifetime limited warranty, prorated after year 10 and transferable to a new owner, plus 3 years on parts. The Energy Manager has a 5-year warranty and Energy Kinetics' lifetime protection plan. Every new installation also includes our Gold Membership, with a 2-year labor warranty.

How much does it cost to install?

It depends on the model, venting, zones, the hot water tank and removal of the old boiler. After a free home visit we give you one written quote that covers everything.

Ready to see if System 2000 is right for your home?

Book a free home visit. We check your chimney, zones and hot water use and give you one written quote.

Specifications from the Energy Kinetics System 2000 brochure and EK1/EK2 oil installation manual (September 2026), checked October 2026. Energy Kinetics and System 2000 are trademarks of their owners. Product photo: Energy Kinetics.